😳😰😯 Solid-state drives (SSDs) are faster, more stable, and consume less power than traditional hard disk drives (HDDs). But SSDs aren't flawless and can fail before their expected life span of seven to ten years.

😳😰😯 It's best to be prepared for an eventual failure. If you know how to tell if an SSD is failing and how to protect yourself, you won't be a victim of SSD problems.

MAKEUSEOF VIDEO OF THE DAY

How Do SSDs Fail?

😳😰😯 Unlike in HDDs, there are no physical moving platters in SSDs, so they're immune to old hard disk issues. However, while the storage component itself isn't susceptible to mechanical failure, other components are.

😳😰😯 SSDs require a capacitor and power supplies, which are vulnerable to malfunctionsβ€”especially in the case of a power surge or power failure. In fact, in the case of a power failure, SSDs have been known to corrupt existing data, too, even if the drive itself hasn't failed completely.

😳😰😯 The other possible problem with SSDs is that they have limited read/write cycles, an issue that exists with all kinds of flash memory. The question that emerges in this situation is how long do SSDs last?

😳😰😯 Typically, SSDs should last many years on average, likely far longer than you'll need them, so you shouldn't worry or be paranoid. In fact, if you bought an SSD in the last couple of years, research has shown that new SSDs are less susceptible to these read/write problems than old ones.

😳😰😯 Either way, the read/write cycle will affect whether you can write to your SSD. Since you'll still be able to read your data, it can all be retrieved. However, you'll still want to know when it is nearing the end of its life so that you can upgrade.

How to Check the Health of an SSD

😳😰😯 There are different ways to check whether your HDD is failing or not. Apart from that, an HDD's constant whirring or ticking also indicates that it is failing. However, unlike HDDs, SSDs won't make a noise to tell you that something is going wrong.

😳😰😯 So, how to know if SSD is failing?

😳😰😯 The most hassle-free and reliable way to determine if your drive is running smoothly is to install software that checks it and silently monitors it for flaws. Windows users might want to try CrystalDiskInfo; macOS users can take a look at Smart Reporter Lite, while Hard Disk Sentinel is good for Linux.

😳😰😯 Apart from that, here are some signs of SSD failure, symptoms of a bad drive, and what you can do about it.

1. Errors Involving Bad Blocks

😳😰😯 Much like bad sectors on HDDs, there are bad blocks on SSDs. This is typically a scenario where the computer attempts to read or save a file but takes an unusually long time and fails. Hence, the system eventually gives up with an error message.

😳😰😯 The common symptoms of bad blocks are:

  1. A file cannot be read or written to the hard drive.
  2. Your PC/file system needs to be repaired.
  3. Active applications often freeze up and crash.
  4. Frequent errors while moving files.
  5. Generally, running slow, especially while accessing large files.

😳😰😯 If you see any of these symptoms, the best idea is to run drive monitoring software and check if there are any physical problems with your drive. If there are, back up your files right away and start shopping for a replacement SSD.

😳😰😯 You can either back up your Windows PC to the cloud or use one of the best backup programs for Windows to store the backup on your external drive.

2. Files Cannot Be Read or Written

😳😰😯 There are two ways in which a bad block can affect your files:

  1. The system detects the bad block while writing data to the drive and thus refuses to write data.
  2. The system detects the bad block after the data has been written and thus refuses to read that data.

😳😰😯 Your data has never been written in the first scenario, so it isn't corrupted. Usually, the system will resolve it automatically. If it doesn't, you can probably fix this by attempting to save the file in a different location or copying it to the cloud, restarting your computer, and then saving it back to your drive.

😳😰😯 Unfortunately, you can't easily retrieve your data in the second scenario. You can try some methods to recover data from a failed SSD, but don't get your hopes up. Bad blocks usually mean that whatever data is contained on those blocks is lost for good.

3. The File System Needs Repair

😳😰😯 Have you ever seen an error message like this pop up on your screen on either Windows or macOS? Sometimes this can happen simply because of not shutting down your computer properly. However, other times, it can be a sign of your SSD developing bad blocks or a problem in the connector port.

😳😰😯 Thankfully, the resolution is easy. Windows, macOS, and Linux come with built-in repair tools for a corrupt file system. Each OS will prompt you to run their respective tool upon such an error, so follow the steps and repair the file system.

😳😰😯 If you're a Windows user, look at some of the best free Windows repair tools for troubleshooting any Windows issue. Whether you're stuck due to outdated drivers or corrupted windows, the tools described in our article will undoubtedly assist you.

😳😰😯 There is a chance of losing some data in this process, and recovering it might be difficult. It's yet another good reason to back up all your files periodically.

4. Frequent Crashes During Boot

😳😰😯 If your PC crashes during the boot process but works fine after hitting the reset button a couple of times, your drive is likely to blame. It might be a bad block or the sign of a dying drive, so it's best to back up your data before you lose any of it.

😳😰😯 To test whether it's the drive, download and run one of the aforementioned diagnostic tools. If you have backed up your data, you can also try formatting your drive and reinstalling the OS.

5. Your Drive Becomes Read-Only

😳😰😯 It's not that common, but some users have experienced this one. Your SSD might refuse to let you perform any operations that require it to write data to disk. However, it can still work in read-only mode. The drive appears dead for all intents and purposes, but surprise, you can still recover your data!

😳😰😯 Before you throw away an SSD that you think has failed, try connecting it as an external hard drive or a secondary hard drive to another computer. Make sure you don't boot the operating system from the SSD; you need to use the computer's main drive for that.

😳😰😯 In case the SSD is still functioning in read-only mode, you can retrieve all your files before securely erasing the SSD.

How to Extend the Life of Your SSDs

😳😰😯 If your SSD is on the verge of failure, or if you've owned one for over five years, then the safest thing would be to start shopping for a replacement. Meanwhile, you can do a few things to extend its lifespan till you get a replacement:

  1. Avoid extreme temperatures from affecting the drive. Ensure good cooling in your PC.
  2. Avoid power outages and any electric fluctuations.
  3. Free up some extra space on your SSD so it can move data from bad blocks.

😳😰😯 If you're looking for a replacement SSD, consider an M.2 SSD. They offer faster data throughput than standard mSATA and should be your default go-to choice when buying a new SSD if your budget allows.